Features:

• Gain (V/A): 10 G
• Frequency Response: DC to 20 kHz
• Equivalent Inpug Noise Current Density: 2.5 fA/√Hz (typ.)

Input Section

• Input type: DC coupling unbalanced, single-ended input, SMA connector
• Maximum input current: ±1 nA
• Input impedance: 30 kΩ
• Recommended signal source resistance: 1 GΩ or more
• Input bias current: 1 pA (typ.) 
• Equivalent input noise current density: 2.5 fA/√Hz (typ.)

Output Section

• Output type: DC coupling unbalanced, single-ended output, SMA connector
• Maximum output voltage: ±10 V
• Maximum output current: ±5 mA
• Output impedance: 50 Ω±10%
• Output offset voltage: ±15mV
• Output offset voltage adjustment range: ±20 mV (adjusting with a variable resistor)

Amplification Section

• Gain (V/A): 1×1010 (1 G) ±1%
• Output gain flatness (when setting fc 0, within ±0.5 dB): DC to 2 kHz
• 0.5, -3dB Frequency response (Cs=10 pF): DC to 20 kHz
• Polarity: Non-inverting
• Low pass filter output (Cut-off frequency setting): 1 kHz / 3 kHz / 10 kHz / THRU, selctable with a switch

Others

• Power connector: HR10-7R-4P (73) connector
• Operating power supply voltage range: ±15 V ±1 V
• Quiescent current: ±40 mA or less, ±32 mA (typ.) 
• RoHS: Directive 2011/65/EU
• EMC: EN 61326-1: 2015
• Dimensions (mm): 76 (W) × 50 (D) × 21.1 (H) (not including bottom plate and protrusions)
• Performance guarantee temperature range: 23°C ±5°C

Temperature and humidity range:

• Operation: 0°C to 40°C 5 % to 85 % RH (absolute humidity 1 g/m3 to 25 g/m3, non-condensation)
• Storage: -10° to 50°C 5 % to 95 % RH (absolute humidity 1 g/m3 to 29 g/m3, non-condensation)

The NF Corp SA-600 Series is a wideband current amplifier (current to voltage converter) with a high gain and wide frequency band.

The SA-607F2 operates stably for the added input capacitance despite a wide frequency band. It operates without oscillation with an added input capacitance of 1000 pF. The LPF cutoff frequency can be selected from four steps with a switch.

The image is a representation of selection. See specifications for product details.