Swerve milling. Bronze titanium. Stonewash throughout.

The Swerve milling pattern on the MAC2 3" creates a flowing, curved grip surface across the titanium that gives you traction and visual movement at the same time. Bronze anodization on the 6AL-4V titanium handle paired with a stonewash blade and stonewashed hardware gives this version a warm, premium finish that works well with the Swerve geometry. Compact at 6.625" overall and 3.1 oz, with ceramic bearings and a ceramic detent ball.

Note from Lone Star Knife & Supply: The PM MAC2 3" punches well above its price point. Jonathan McNees designed the PM line specifically to bring his level of fit and finish to a more accessible format without sending production overseas. The ceramic bearing action and titanium hardware at this price are hard to find from an American maker.

Swerve milling runs across both the face scale and lock side of the titanium, creating a grip texture that follows the natural contours of a hand hold. On the bronze anodized version, the milling pattern adds visual depth to the warm color. Stonewash blade and stonewashed hardware complete a cohesive, premium carry setup.

Specifications

• Overall Length: 6.625"
• Blade Length: 3.0"
• Blade Steel: CPM MagnaCut (63-64 HRC)
• Blade Finish: Stonewash
• Handle Material: 6AL-4V Titanium, Swerve milling
• Handle Finish: Bronze anodized
• Hardware: Stainless Steel, Stonewash finish
• Pivot: Caged ceramic bearings with ceramic detent ball
• Lock Type: Frame Lock
• Opening Method: Manual (Thumbstuds)
• Weight: 3.1 oz
• Country of Origin: Made in USA (Vernon, Alabama)

What Makes This MAC2 3" Stand Out

• 3.0" CPM MagnaCut blade at 63-64 HRC
• Swerve milled bronze anodized 6AL-4V titanium on face scale and lock side
• Stonewash blade and stonewashed stainless hardware throughout
• Caged ceramic bearings with ceramic detent ball
• 6.625" overall, 3.1 oz
• Frame lock with titanium clip
• Made in the USA

PM Line, USA Built

Jonathan McNees created the PM MAC2 line with one condition: it stays made in America. Machining is outsourced to US shops only, with fitting, detents, and sharpening handled in-house at the Alabama facility. Caged ceramic bearings and a ceramic detent ball give the MAC2 3" an action that competes with knives at significantly higher price points. CPM MagnaCut at 63-64 HRC handles the cutting performance side with no compromises.

About McNees Knives

McNees Knives is a veteran-owned small business out of Vernon, Alabama. Jonathan McNees has been refining his designs since 2010, building knives that combine custom-level machining with real-world carry performance. Every Dixon is hollow ground in-house at the Alabama shop. The PM line has outsourced machining done exclusively by US shops, with fitting, detents, and sharpening handled by Jonathan and his team directly. Made in the USA is not a marketing line here. It is how the shop operates.