Scratch prevention

This product is attached to the side step (painted part) of the vehicle body near the foot of the door entrance, which is easily scratched when getting in and out of the vehicle. By installing this part, you can protect it from scratches and create a dress-up effect inside your car. Specifications The material is high quality stainless steel 304 material, and the thick material ensures strength. All of the cut lines on the product body are covered with rubber, which protects against damage to the vehicle body during installation and use. The surface of the product has a mirror bar, which is a great accent. The product color is a black hairline with a chic and calming tone. Installation is as simple as attaching the double-sided tape to the back of the product, so anyone can easily enjoy dressing it up. This product is a product designed specifically for the vehicle model, created by scanning 3D data from the actual vehicle and using a special mold. In particular, we put a lot of effort into adjusting the fitting on the actual vehicle, making adjustments and checking many times to achieve a high-quality fitting. Because this is a product that will be installed on your precious car, we have carefully created it with attention to detail. Please take this opportunity to try this product and enjoy a wonderful car life. [Compatible models] [Note (NOTE) E13] ■2WD X S F ■4WD [AURA FE13] ■2WD G G leather edition ■4WD G FOUR G FOUR leather edition [Set contents] ■Product body 4P Double-sided tape installed on the back of the product ■Degreasing cleaner ■Masking tape ■Installation manual [Material] ■High quality Stainless steel (SUS304) [Color] ■Black hairline x mirror bar *The actual color may differ depending on the coloring of your monitor. [About Guarantee] ■One month after the product arrives *Once the double-sided tape is removed, we cannot accept returns or exchanges for any reason. [Caution] - Please be careful not to splash water or apply force for 24 hours after installation. -If you are concerned about the adhesive strength, please prepare double-sided tape separately.・Once the double-sided tape is removed, we cannot accept returns or exchanges for any reason. Before installation, please be sure to perform temporary alignment and carefully confirm the pasting position before installing.・Before installing the product, be sure to have the surface to which it is attached wipe off any oil and clean it before attaching the double-sided tape. If you attach double-sided tape with oil or dirt still attached to the mounting surface, the adhesion strength of the double-sided tape will decrease and there is a risk of the product peeling off or coming off. Please be sure to perform the above cleaning before installation.・There is no guarantee against scratches or damage to this product or during use. Please use at your own risk. Caution (Disclaimer) > Please read ■Notes■ *Please acknowledge the contents of this item before ordering* Before installing the product, be sure to wipe off any oil from the mounting surface, clean it, and then apply the double-sided tape. Please install it. If you attach double-sided tape with oil or dirt still attached to the mounting surface, the adhesion strength of the double-sided tape will decrease and there is a risk of the product peeling off or coming off. Before installing the product, please be sure to check the installation position and the fitting before applying the double-sided tape. We cannot accept returns or exchanges under any circumstances after the red film on the double-sided tape on the back of the product is removed. Please check the product in advance. Although we take great care in inspecting and packaging our products, in rare cases, products may be slightly damaged due to impact during transportation. If there is no problem with installation, we may not be able to accept exchanges/returns of the product. In order to protect the quality of stainless steel products from impact during transportation and storage, we apply a transparent film sheet to the surface of the product to prevent scratches. When the product arrives at the customer, please remove the film and install it. At that time, the adhesive of the film may adhere to the product itself. We apologize for the inconvenience, but please remove the adhesive film using a commercially available peeler.


Manufacturer: ‎Echoes Products
Brand: ‎No-brand product
Manufacturer reference: ‎sky008-02-bk
Exterior condition: ‎Stainless steel
Special notes: ‎Scratch prevention