★【Replacement AC Blower Motor with Fan】: Responsible for producing air through the vents of your car's AC and heating system. If your AC or heater isn't producing or circulating heated or cooled air, there may be a problem with your blower motor. ★[Replacement part number]: 700113, 79310S0KA01, HO3126104, BM 2723, 5336, PM2723, 3010021, 79310-S0K-A01, 35115, 44-1251, 15-80948, HO3126104, 76960, 2400-25711 9, 902 21023, 902 21023 736. ★【Compatibility】: 2001 - 2003 Acura CL / 1999 - 2003 Acura TL. ★【Motor Advantages】: Quiet, energy efficient, durable, wind powered, no noise. Permanently lubricated, self-aligning bearings with long design life and reliable performance. ★【1 Year Warranty】: All blower motor resistors must be inspected and tested before shipping.

If you turn up the AC/heat in your truck and the amount of air coming out of the vents remains the same, you may need to replace the blower motor. Blower motors are designed to produce more air when you turn a knob on your AC system. But when the blower motor fails, the motor can no longer blow high. Replacing the faulty factory blower motor on your truck will allow you to control the AC/heat again. OE Part Number: 3010021 5336 15-80948. 44-1251. PM2723. 15-80948. 44-1251. 35115 79310-S0K-A01. PM2723. Heater Blower Motor Fits: 2003 Acura CL 2002 Acura CL 2001 Acura CL 2003 Acura CL 2002 Acura CL 2001 Acura CL 2000 Acura CL 1999 Acura CL Replacement Instructions. 1) Locate the blower motor under the dashboard on the passenger side. Access to the blower motor on some vehicles requires removing the dashboard. Disconnect the blower motor electrical connector. (Note: On older vehicles, the blower motor is located in the engine compartment on the passenger side firewall). 2) Remove the blower motor assembly retaining screw. 3) Remove the blower motor fixing screw. Remove the motor from the box. 4) Compare the new blower motor to the old blower motor to ensure you have the correct part. Install the new motor into the box and tighten the fixing screws. Reinstall the blower motor assembly. 5) Connect the blower motor electrical connector. 6) Operate heating and A/C systems. Verify that the blower motor is operating at all speeds and that the system is producing hot and cold air.


Manufacturer: ‎Jackma55
Brand: ‎Jackma55
Packing size: ‎20.7 x 20 x 19.9 cm; 1.9 kg
Manufacturer reference: ‎KBM0118
Made by the manufacturer Discontinued: No
Genuine part number: 700113 79310S0KA01 HO3126104 BM 2723 5336 PM2723 3010021 79310-S0K-A01 35115 44-1251 15-80948 HO3126104 769 60 2400-257119 902 21023 902 21023 736 blower motor
Number of bolts: ‎12 volts
Product weight: ‎1.9 Kilograms