The famous forward-sealing Perlick beer faucet, with integrated Flow Control valve and Push-Back Creamer!

Use the flow control feature to reduce unwanted foaming during the length of the pour, then finish it off with the push-back creamer to top off the beer with the perfect amount of foam. Get ready to start pouring picuture-perfect pints with the Perlick 690SS!

Constructed of 304 stainless steel to last a lifetime.

About Perlick Forward Sealing Beer Faucets:
The #1 feature of the Perlick faucet is its forward sealing design. Why is that so important? An ordinary, rear-sealing faucet closes by pushing a shuttle against the faucet shank, at the rear of the faucet. So once the tap is closed the faucet is still full of beer that has to be drained out. There is actually a pin hole in the back of an ordinary faucet that allows beer to drain. Because of this design, leftover beer residue inside the faucet makes operation sticky and can harbor bacteria which harm your beer’s flavor as it flows through the faucet. In the Perlick faucet, with its Forward Sealing design, beer only has to drain from the short 1" nozzle section. This allows it to always operate smoothly (even when it was not cleaned between uses) and greatly reduces contamination!.

Please note: In order for the push-back creamer to function properly, you must avoid overtightening the tap ferrule. If you're unable to push-back on the faucet lever, check that there's enough room between the tap ferrule and the friction bonnet and back off the tap ferrule as needed.