Tektronix TRCP3000 3,000 A AC-Only Rogowski Current Probe

Key Features At A Glance

• BNC termination works with any instrument supporting a BNC interface
• AC-only Rogowski design with a thin, flexible coil that wraps around bus bars or small IC legs on a MOSFET or IGBT
• Peak current measurement from 250 mA up to 3,000 A peak across the series
• Frequency coverage from 1 Hz to 30 MHz across the series
• Coil diameters from 1.7 mm to 8.5 mm, spanning small-component legs to large bus bars
• Optional 3- or 5-year calibration service, repair service, and calibration data reports

The TRCP Series is a family of Rogowski current probes consisting of the TRCP0300, TRCP0600, and TRCP3000. Each probe is equipped with a BNC connector and works with any instrument supporting the BNC interface. The Rogowski coil design lets you connect to large connection points such as bus bars, or wrap around small connection points such as the leg of a transistor or an IC pin on a MOSFET or IGBT.

The TRCP Series probes are intended for current measurement in motor drives, inverters, power supplies, and industrial applications. Because the coil is flexible and clips around a conductor rather than requiring a break in the circuit, the probes suit both small-form-factor components and large power conductors found in these environments.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois.

Compare Other Models in This Series

The TRCP Series comprises three Rogowski current probes — the TRCP0300, TRCP0600, and TRCP3000 — that share a common BNC-terminated, AC-only architecture but differ in frequency range, peak current handling, and coil diameter. All three connect to any instrument with a BNC interface and clip around a conductor without breaking the circuit.

The smaller-coil TRCP0300 and TRCP0600 target small-form-factor components, where a thin, flexible coil can be wrapped around a test point such as a transistor leg. The TRCP3000 carries a larger coil built to handle large overload currents and reach larger or more awkward conductors such as bus bars.

Each new model below is its own dedicated product page with condition-matched pricing. Select the specific probe that matches your measurement requirement to see its availability and price.

The three models are differentiated by their measurement envelope. The TRCP0300 covers 9 Hz to 20 MHz with 300 A peak and a 250 mA minimum current; the TRCP0600 covers 12 Hz to 30 MHz with 600 A peak and a 500 mA minimum; and the TRCP3000 covers 1 Hz to 16 MHz with 3,000 A peak and a 500 mA minimum. See the comparison table for the per-model values.

Coil diameter scales with the current envelope: 1.7 mm on the TRCP0300, 4.5 mm on the TRCP0600, and 8.5 mm on the TRCP3000. The smaller coils favor access to fine, small-form-factor test points, while the larger TRCP3000 coil accommodates higher overload currents and larger conductors such as bus bars. All three terminate in a BNC connector.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Product Core & Specifications

Important: All TRCP Series probes are AC-only current probes.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.