Fluke 80K-15 Electronic Air Cleaner Test Probe

Key Features At A Glance

• Voltage range of 1 kV to 15 kV DC or peak AC, with 10 kV RMS AC capability
• 1000:1 division ratio — multimeter reads 1 V for every 1000 V measured at the probe tip
• DC accuracy of ±2% when paired with a 10 MΩ input impedance multimeter
• AC accuracy of ±5% at 60 Hz
• 1000 MΩ input resistance for low-loading measurements in low-energy environments
• Special plastic body construction provides user isolation from the voltage being measured
• Heavy-duty grounding clip for secure earth ground connection
• CSA certified

The Fluke 80K-15 Electronic Air Cleaner Test Probe is a high-voltage measurement accessory that extends the voltage measurement capability of most digital multimeters up to 15 kV. It is designed for use in low-energy environments such as measuring the output voltage in electronic air cleaners.

A high-voltage probe like the 80K-15 allows technicians to safely interface a standard handheld or bench digital multimeter with voltages well beyond the meter's own input range. The probe scales the measured voltage down through an internal divider, presenting a manageable signal to the meter while keeping the operator isolated from the high-voltage source.

Brand Heritage

Fluke Corporation was founded by John Fluke Sr. in 1948 and has been a US-based test and measurement manufacturer ever since, headquartered in Everett, Washington. Fluke became part of Danaher Corporation in 1998, and its test and measurement operations have remained under the Fluke brand throughout that ownership.

Product Core & Specifications

Specification	Value
Voltage range	1 kV to 15 kV DC or peak AC, 10 kV RMS AC
Input resistance	1000 MΩ
Division ratio	1000:1
DC Accuracy	±2%
AC Accuracy	±5% at 60 Hz
Multimeter input	Use a multimeter with 10 MΩ input impedance in the volts mode for best accuracy

Important: Voltage range: 1 kV to 15 kV DC or peak AC, 10 kV RMS AC. For best accuracy, use a multimeter with 10 MΩ input impedance in the volts mode.Important: For best accuracy, use a multimeter with 10 MΩ input impedance in the volts mode.Important: Intended for low energy environments such as measuring the output voltage in electronic air cleaners.Recommended pairing: use the 80K-15 with a digital multimeter having a 10 MΩ input impedance in the volts mode for best accuracy, per the probe's specified multimeter input requirement.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.